Examples of Work that SUPERVISOR™ can do, to eliminate work for technicians:

1. Change the Enable password, on every device, at once
2. Change the authentication from local to a Radius server
3. Change SNMP community strings
4. Add a route process
5. Add a network to a routing process
6. Change the NTP server to one of the core devices
7. Revise the banner messages to reflect a required wording change
8. Add a NAT statement
9. Define a revised QoS policy and apply it to all the Fast Ethernet interfaces
10. Ensure all devices have the same TACACS server entries
11. Remove old or outdated local user accounts
12. Add network summarization statements to an interface
13. Change the dial-backup number to reflect a new long-distance provider
14. Convert a frame-relay based connection, to an MPLS-based connection
15. Enforce VLAN consistency, enforce correct VTP participation
16. Convert an access-based port to a trunk port
17. Revise a DHCP scope to reflect a new DNS server
18. Correct an errant switch that has taken the role of spanning-tree root
19. Clear all routing processes, clear caches, and reset the router without having to reboot it
20. Force a save of the current running configuration to both NVRAM and a TFTP server
21. Change dial peering on VoIP gateways
22. Turn off a rogue port
23. Deny access to an IP engaged in nefarious activity
24. Change the assigned VLAN of a port
25. Change the IP addressing on the device (Note: connectivity must be maintained)
26. Apply a new IPSec policy for IKE negotiation
27. Add a static encryption key for a new site on the VPN
28. Swing all Certificate-based VPN routers to a new authority, and refresh their certificates
29. Create a new VLAN, and the appropriate interfaces, IP addresses and routing statements to get the new subnet operational
30. Convert from EIGRP to OSPF, everywhere, all at once
31. Execute Step14.B-7 of the Standard DR Exercise Procedure by applying the requisite configuration changes to the applicable devices
32. Download a new IOS version from a TFTP server
33. Create a new SSH key, enable SSH version 2, and disable Telnet access
34. Repair/correct duplex mismatches.